TREX TB75 Скачать руководство пользователя

Страница: 12 / 21

Electric Vehicle / Boat Winch

E&OE

Connecting the Electrical Wiring

Depending on your level of electrical wiring knowledge, you may wish to have this procedure

performed by a qualified technician. Prior to performing this procedure, make sure that the

vehicle engine is OFF, and that the engine, transmission, and exhaust systems are cool to the touch. • Plan

a route for the wiring harness from the point of where the winch is mounted to the vehicle battery. The route

should be secure, out of the way of moving parts, road debris, or any possibility of being damaged by

operation or maintenance of the vehicle. For example, the wiring may be routed under the vehicle and

attached to it using suitable fasteners (not included). Do not attach the wiring to the exhaust system, drive

shaft, brake lines or cables, fuel lines or any other components which may damage the wiring through heat

or motion, or create a fire hazard. If a hole is drilled through the bumper or any other part of the vehicle, be

sure to install a rubber grommet (not included) in the hole to prevent fraying of the wires at that point.

1. Route the wiring harness, following the precautions mentioned above. Once the wiring harness is routed

to the battery, attach the

RED

lead to the battery POSITIVE (+) terminal (Figure C).

2. Attach the

BLACK

lead to the battery NEGATIVE (–) terminal (Figure C).

Connecting the Remote

Control

1. Lift up the rubber cover on the

left side of the winch, then insert

the remote control connector into

the socket (Figure D).

Attaching the Hand Crank

Insert the mounting hole of the

hand crank onto the shaft. Then

secure the hand crank to the

shaft, using the nut (Figure E).

Figure D

Figure E

Figure C

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

Содержание TB75






















Результаты поиска

Содержание TB75

Отзывы:

Похожие инструкции для TB75

Бренды по названию

Популярные бренды

TREX TB75, Руководство пользователя

Результаты поиска

Содержание TB75

Отзывы:

Похожие инструкции для TB75

Бренды по названию

Популярные бренды