11
Handle the product and switch it ON with the button (4).
WARNING
:
the appliance is powerful. Hold it firmly.
The appliance is designed also for vacuuming on wet surfaces.
EMPTY THE CONTAINER
In order to ensure the best performances and having no losses in the air flow and
cleaning power, periodically drain the container.
CAUTION: before emptying and/or start cleaning the dust bin, unplug the unit
from the main electrical outlet.
To empty the container, follow the steps below:
-
Press the release button (4) and pull out container (5), as for Fig. C.
-
Bring the container over a bin and remove the black lid (Fig. D). Empty the container
in the bin and mount the lid.
To clean the filter system:
-
Extract the HEPA filter from the lid (Fig. D). Place the filter on a bin and shake it to
bring down the dirt or, alternatively, clean it with a brush. Once finished, place the filter in its position on
the lid, and mount the container (5) to motor unit.
For more accurate cleaning, rinse the HEPA filter with a soft brush and/or with warm water and
DRY IT
THOROUGHLY. CAUTION: Do not use detergent to clean the filter or the cover. The HEPA filter
must be completely dry before using the vacuum cleaner.
MAINTENANCE AND CLEANING
CAUTION: before starting any cleaning/maintenance operations, unplug unit from electrical outlet.
Normally this vacuum cleaner is not noisy. But when the dust container is full or the HEPA filter is clogged,
the noise emitted changes, so the suction power. In addition, thanks to the transparent container, you can see
the amount of dirt making it very easy to understand when you need to empty the container. Even the filters
should be cleaned periodically. These filters can also be damaged or exhausted (HEPA filter) and should be
replaced with new filters. Emptying the dust container and cleaning the filters as stated in this booklet, you
will avoid stressing the motor.
Clean the main body with a damp non-abrasive cloth, avoiding the use of aggressive detergents or abrasive
cleaners, which could ruin the aesthetic parts of the device.
The cloth should not be too wet, since the water penetrating the device, can seriously damage it. Cleaning
filters by following the specific instructions on this guide.
PROBLEMS AND SOLUTIONS
PROBLEM
CAUSE
SOLUTION
The cleaner does not
work
The unit is not correctly connected
Electricity is down.
Plug the unit.
Check the distribution board.
Suction power is
weak
The container is full.
The unit is obstructed..
Filters need to be cleaned.
Empty the container.
Unplug and check if something obstructs the unit
Clean or change the filter.
Dirt comes out of the
container
Container is full.
Not correctly installed.
Broken container.
Empty the container and installi t again.
Replace the container.
Unit cannot vacuum
Blocked hose.
Dust container is full.
Remove objects inside the hose.
Empty the container and clean the filters
TECHNICAL FEATURES
•
Power supply: AC 230V
~
50/60Hz, 600W
•
Dust capacity 1,2 lt
•
Vacuum 14 kPa
