12
XF 1300 BEACH
ENGLISH
BASIC FUNCTIONS
POWER ON/OFF
Set the main switch POWER ON/OFF(20) to "ON" to turn on and use the device with its internal battery.
Set the main switch POWER ON/OFF(20) to "OFF" to completely switch off the device or charge the battery.
DOUBLE FUNCTION KEYS
The following keys on the unit have a double function depending on how long they are pressed:
-
<
(10) key: a short press plays the last track played or the previous track. Long press to lower the volume.
-
>
(14) key: a short press plays the next following track. Long press to increase the volume.
-
,(15) Play/Pause key: a short press activates the pause of the current track or the start of playback. A long press puts
the unit in "Folder mode", allowing you to navigate in and out any folders in the USB memory, using the
<
(10) and
>
(14)
keys
- General Volume knob(17): a long press puts the unit in "Mute" mode, press it again to restore the sound.
MODE F
UNCTION
To change the operating mode, press several times the SOURCE button(11) on the unit or press the MODE button(21) on the remote
control to select: BLUETOOTH
("BLUE" appears on the display), RADIO (the frequency appears on the display), USB (only if on the
USB socket (8) a memory is connected, a small "USB" message appears on the display), AUX-IN ("LINE" appears on the display).
ADJUSTING THE VOLUME
1. Turn the VOLUME knob(17) to increase or decrease the general playback volume or use the -/+ keys(26) on the remote
control;
2. Turn the MIC VOL1(4) or MIC VOL2(5) knob to adjust the volume of the signal at the MIC1(2) or MIC 2(3) input.
PRE-EQUALIZER
This unit has a pre-set audio equalization system. Press several times EQ button(5) on the remote control to select one of the 6
available audio equalizers or select it directly using the corresponding button among those indicated on the unit (16 and 18) and
which is best suited to the current sound reproduction.
SETTING TONE TREBLE AND BASS
To separately adjust the bass and treble sound:
1. Press the VOLUME knob(17) on the unit once to adjust the bass tones, a "b" will appear on the display. Turn the knob to make
the adjustment;
2. Press the VOLUME knob(17) on the unit a second time to adjust the high tones, a "t" will appear on the display. Turn the knob
to make the adjustment;
3. Press the VOLUME knob(17) on the unit a third time to return to volume control (shown on the display with a "v").
ECHO EFFECT
Turn the ECHO knob(6) to increase or decrease the echo effect on the input MIC1/2.
Note:
the echo only works on microphone input.
DISCO-LIGHT EFFECTS
Press the LIGHTS button(13) on the unit to activate the Disco-Light effect.
To deactivate the Disco-Light effect, press the LIGHTS button(13) on the unit again.
USB CHARGE OUTPUT
The USB socket(8) can be used to charge external devices, like smartphones or tablets.
- Connect your external device to the USB socket(8) using the appropriate cable (not supplied);
- The charge indicator on the external device will indicate the charging status in progress.
FM RADIO MODE
To use FM mode, you will first need to scan for strong stations in your area. To begin the scan, press the
(15) button on unit.
This will begin scanning, and any strong signals will be saved as presets.
Once scanning is complete, you will be able to use the
<(10)
and
>(14)
buttons to jump to the saved station presets. Presets will be
numbered, and the FM frequency will be displayed.
