Trevi SB 8312 TV, Руководство пользователя, Страница: 6 / 20

6
SB 8312TV
INSTALLATION NOTE
When installing the SB 8312TV with TV under 24" in size, you may need to lift up the TV so that the sound bar doesn't
stand between the TV infrared receiver and the remote control signal.
POWER SUPPLY
Connect the DC plug of the supplied adapter to the 19V socket (3) located at the back of the appliance. Connect
the supplied power adapter to an electrical outlet.
POWER ON/OFF AND VOLUME ADJUSTMENT
- Press and hold the /M button (7) for 3 seconds to switch ON the unit.
- Press and hold the /M button (7) for 2 seconds to switch OFF the unit.
- Rotate the volume knob (2) to increase/decrease the volume.
Note: This device has an AutoPower Off function; this function allows automatic shutdown after 15 minutes in the
absence of an audio signal on the inputs.
AUX INPUT
1. To use a jack cable 3.5mm stereo to connect the AUX input (6) of unit to the headphones/ audio output of the
TV or other device;
2. Switch On the unit and press the /M (7) key several times until the voice guide signals " AUX mode "; the signal
on the AUX input (6) will be automatically reproduced.
Warning:
- Some audio outputs which you connect the Soundbar (like headphone output) can have its own volume
control: make sure you have set on the source device an adequate level audio output otherwise the Soundbar
will sound even at maximum volume.
- If the sound played by the Soundbar be distorted means that the input signal is too strong: lower the volume
of the Soundbar or paid on a level audio source device output more low.
- When connecting to a TV via headphone out, sometimes the sound reproduced from the Soundbar is low even
at maximum volume; in this case connect the Soundbar to the audio output of the TV-scart adapter (not supplied).
USB INPUT
1. Insert a micro-SD Card into the micro-SD input (5).
2. Switch On the unit and press the /M (7) key several times until the voice guide signals " Play by USB drive ";
3. Press (8) button to stop playback temporarily. Press again to resume.
4. Press 9 (9) or : (10) button to go to the previous or next track.
TF CARD INPUT (Micro SD CARD)
1. Insert a micro-SD Card into the micro-SD input (5).
2. Switch On the unit and press the /M (7) key several times until the voice guide signals " Play by TF card ";
3. Press (8) button to stop playback temporarily. Press again to resume.
4. Press 9 (9) or : (10) button to go to the previous or next track.
ENGLISH