Trevi MDV 6300 BT, Инструкция по эксплуатации

Страница: 11 / 48

11
MDV 6300 BT ENGLISH
RADIO
TUNING
Select the frequency band (FM1, FM2, FM3, MW1, MW2) you wish to listen to with the BAND key (22) on the
remote control.
Press the key
on the remote control to navigate to the next preset station.
Press the key on the remote control to navigate to the previous preset station.
Press the remote control key once to tune into the station next to the one shown. Press and hold to increase
the displayed frequency by 0.05 MHz.
Press the remote control key once to tune into the station previous to the one shown. Press and hold to decrease
the displayed frequency by 0.05 MHz.
MANUAL STATION STORING
Tune into the desired station as described above.
Press and hold any remote control key from 1 to 6 corresponding to the location where you wish to store the
station or tap the corresponding number on the LCD screen, until the radio beeps to indicate the station has been
stored automatically.
Repeat the procedure to store all the other stations in all bands.
AUTOMATIC STATION STORING
Hold down the AMS key (3) on the remote control to start scanning stations automatically, the car stereo will store
the strongest stations in that band to take up all presets available (18 FM, 12 AM).
PLAYING A DVD
STARTING PLAYBACK
1. To play a DVD, insert the disc into the appropriate tray.
2. Place the disc with the titles facing upwards.
3. The disc starts playing automatically.
Note: All functions that may be activated via remote control may also be activated through the car stereo
front panel.
SWITCHING TO NEXT / PREVIOUS CHAPTER
1. Press the key on the remote control to switch to the previous chapter.
2. Press the key on the remote control to switch to the next chapter.
FAST SEARCH
1. Press repeatedly the key on the remote control to fast-rewind the images.
2. Press repeatedly the key on the remote control to fast-forward the images.
3. The speed increases each time the key is pressed.
4. The numbers on the screen next to the symbol or display the speed (2x - 4x - 8x - 16x - 32x).
5. To return to normal playback, press the key (19).
STOPPING PLAYBACK
1. Press the (21) key of the remote control to stop disc playback, the screen will show “STOP” and the initial
screen.
2. Press the key (19) to resume playback from the point it was interrupted.
3. Press the key (21) twice to stop playback completely.
4. Press the key (19) to resume playback from the beginning.