19
HCV 1035 BT
ENGLISH
NOTE:
• If you press the button during random play, you can move to the track selected next by the random operation. On the other hand,
the button does not allow you to move to the previous track. The beginning of the track being played will be located.
• In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks).
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP FORWARD
:
or SKIP BACKWARD
9
Button to go to the next track or go back to
the beginning of the current track.
2. During playback, press and hold the SEARCH FORWARD
:
or SEARCH BACKWARD
9
Buttons to search within the current
track with audible high speed playback.
PROGRAMME SETTING (REMOTE CONTROL ONLY)
User can program up to 32 tracks in CD mode or 64 tracks in MP3 in any desired order. Programme mode is activated while in
STOP mode.
1. Press the
MEMORY
button to enter programme mode.
2. Press the
9
or
:
buttons to select the track that you want to preset.
3. Press the
MEMORY
button to confirm the track.
4. Repeat steps 2-3 to programme more tracks. Once it is completed, press the PLAY/PAUSE button to start playback of the
programmed tracks.
BLUETOOTH OPERATION
Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of
digital devices, such as mobile phone or computer. It operates within a range of about 10meters (30 feet) without the hassle of having
to use cables to connect these devices. Since the Bluetooth technology does not require line of sight between the communicating
devices, it is not necessary to line up the transmitting device and the receiver, as in the case of infrared technology.
Communication System and Bluetooth Profile of this unit
There are many available Bluetooth Profiles describing the basic communication methods, specific functions and uses, to enable
communication between devices.
This unit supports the following:
Communication System: Bluetooth Specification version 2.1 BluEnhanced Data Rate (EDR) Profile : A2DP (Advanced
Audio Distribution Profile) A2DP enables audio streaming from an A2DP equipped Bluetooth stereo audio source device (eg mobile
phone) to this unit. By converting wireless stereo audio signal to analogue audio signal, you can enjoy listening to the sound through
this speaker system. AVRCP (Audio/Video Remote Control Profile) is a technology that allows a single remote control to control all
Bluetooth enabled Audio Video equipment to which a user has access.
Notes when using unit with a mobile phone:
• This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone.
• Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile phone while transmitting
the sound using a Bluetooth connection.
Pairing Bluetooth devices:
Bluetooth devices need to be initially paired first before they can exchange data. Once paired, it is not necessary to pair them again
unless:
• Pairing is made with more than 8 devices. Pairing can only be made one device at a time. This unit can be paired to a maximum
of 8 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one.
• This unit is reset. All pairing information is deleted when unit is reset.
• Pairing information is deleted while re-pairing, etc.
Pairing with other Bluetooth source devices:
1. Press the STAND-BY/ON button to turn the power on.
2. Press MODE button on the remote control or BT/AUX button to turn on the BT mode.
3. Press and hold the PAIRING button for 3 seconds or more. PAIRING indicator blinks quickly. The unit is now in pairing mode and
is ready to be paired with other Bluetooth source devices.
4. Perform pairing procedure on the source device to detect this unit. “xxxx” will appear in the detected devices list (if available) in
the source device. (Refer the source device operating manual for details).
NOTE:
• Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
