4
DT 3372SCH
ENGLISH
SWITCHING ON THE APPLIANCE
Insert the infrared sensor into its special slot.
Connect the DC 5V adapter to a socket and the adapter jack to the appliance.
The appliance will switch on automatically (green infrared sensor light).
Switch over your TV channel to the AV channel (see the instruction manual of your TV).
Press the POWER key on the remote control to activate the stand-by mode (red infrared sensor
light); the TV will switch over to analogue reception automatically.
To switch the appliance on again, press the POWER key on the remote control again; the TV will
switch over to digital reception automatically.
FIRST INSTALLATION
Use the navigation keys to navigate in the menu and press OK to confirm your selection or press the
EXIT key to exit.
When switched on for the first time the display will show the following screen:
Impostazione Antenna (Antenna Setting):
Use the navigation keys to select ON if there is an amplified antenna, otherwise leave on OFF.
Impostazione Paese (Country Setting):
Use the navigation keys to select the country where to perform your search.
Lingua OSD (OSD language):
Use the navigation keys to select the menu language (OSD).
Lingua audio (Audio Language):
Use the navigation keys to select the main audio language.
Lingua sottotitoli (Subtitle Language):
Use the navigation keys to select the main subtitle language.
LCN:
Use the navigation keys to activate/deactivate the Logical Channel Number (LCN). This function
allows numbering the channels according to the reception sequence (ON) or leaving the
progressive numbers already assigned (OFF).
Auto Fuso orario (Auto Time Zone):
Use the navigation keys to activate/deactivate the automatic time zone assignment according to
the selected country.
Fuso orario (Time Zone):
Use the navigation keys to select your time zone. You cannot modify this selection if the “
Auto
Fuso orario
” (
“Auto Time Zone”
) item is set to ON.
