tresnar TCSS-100, Инструкция по эксплуатации

Страница: 23 / 28

TCSS-100/130
4669
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,fax:+48 58 56 300 80 www.ega.com.pl
21
20.Mains cable
21.2 screws / ring washers / nuts each for grinding plinth fi xing
22.2 Allen keys
23.Socket wrench
24.Open-ended wrench
Function description
The chain sharpener is installed firmly on a work surface before initial use. It has an
electronic motor as the drive. The rake angle is easily adjustable between -
30° and +30°,
using a rotary disk. The chain guide rail has a variably adjustable stopper. To sharpen,
swivel the grinding head. The equipment is fitted with a protective screen in order to protect
the user.
Installation
Warning! For installation, use the screws and tools included in the scope of delivery.
Erection:
1. Place the grinding plinth (15) on a stable and level base.
Here, the rotary disk (14) with the saw chain fixing must protrude from over the edge of the
table.
Thickness of the table edge: 15 - 50 mm.
Ensure that sufficient space is available for working and that there is no risk to other people.
2. Screw the grinding plinth firmly onto the work surface using the enclosed screws,
ring washers and nuts (21).
Install the grinder:
3. Unscrew both fixing clips (17) from the grinding plinth (15).
4. Position the grinding housing (2) on the grinding plinth (15) and screw on the housing and
the fixing clips (17).
Working with the equipment
Use only accessory components that are recommended in these instructions. Use only
original components.
Disconnect from the mains before carrying out any work on the equipment.
Check the grinding disk before use: check the distance between the protective screen and
the grinding disk. Do not use broken, cracked or otherwise damaged grinding disks.
Switch on the equipment only when it is safely installed on the work surface.