Trenz Electronic TE0712 TRM Скачать руководство пользователя страница 19

Страница: 19 / 20

TE0712 TRM

Revision: V14

Page

http://www.trenz-electronic.de

Disclaimer

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time

without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this

document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all

warranties, either express or implied, with regard to this document and any information contained herein,

including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non

infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or

consequential damages in connection with the furnishing, use, or performance of this document or of any

information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for

any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business

interruption) arising out of the use, inability to use, or the results of use of this document, any documents

linked to this document, or the materials or information contained at any or all such documents. If your use

of the materials or information from this document results in the need for servicing, repair or correction of

equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and

retrieval or translation into a foreign language) without prior agreement and written consent from Trenz

Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be

used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually

also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be

conscious of their social responsibility and contribute to the preservation of our common living space. That

is why Trenz Electronic invests in the protection of our Environment.

Содержание TE0712 TRM




















Результаты поиска

Содержание TE0712 TRM

Отзывы:

Похожие инструкции для TE0712 TRM

Бренды по названию

Популярные бренды

Trenz Electronic TE0712 TRM, Руководство пользователя

Результаты поиска

Содержание TE0712 TRM

Отзывы:

Похожие инструкции для TE0712 TRM

Бренды по названию

Популярные бренды