Section 3 / Handling Precautions
6
Last Updated: August 20, 2020 | Manual (Rev 2)
Handling Precautions
WARNING:
This product has components that may be damaged by electrostatic
discharge.
To protect your Mini PC from electrostatic damage, be sure to observe the following precautions
when handling or storing the system:
Keep the Mini PC in its static-shielded bag until you are ready to perform your installation.
Do not touch the I/O connector pins.
Use a grounded wrist strap at your workstation or ground yourself frequently by touching
the metal chassis of the system before handling any components. The system must be
plugged into an outlet that is connected to an earth ground.
Use antistatic padding on all work surfaces.
Avoid static-inducing carpeted areas.
WARNING:
There is danger of explosion if the CMOS battery is replaced incorrectly.
Disposal of battery into fire or a hot oven, or mechanically crushing or cutting of a
battery can result in an explosion.
WARNING:
Risk of explosion if the MPC1000 battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. The MPC1000 uses a
Panasonic CR2032 battery available from Trenton. The Trenton Systems part number
for a replacement battery is 29-005774-000.
