Trenton Systems BXT7059, Техническое описание

Страница: 28 / 46

BXT7059 / BXTS7059Technical Reference Boot Setup
Chapter 4 Boot Setup
Introduction
Select the
Boot Setup
menu item from the Aptio TSE screen to enter the BIOS Setup screen. The Boot
menu option allows you to access the following the following boot setup features.
Boot Configuration
Enter the number of seconds you wish the board to wait for a setup key activation key.
Option Description
Setup Prompt
Timeout Acceptable values: 0 to 65535 (0xFFFF) and the
default value is 1
Note: 65535 means the BIOS will wait indefinitely for a key press
Bootup
Numlock State
On
/Off – Selects the keyboard numlock state
Quite Boot
Disabled
/Enabled - this default value allows the computer system to display the POST
messages. The enabled option is used for displaying a custom OEM logo during
POST.
Fast Boot
Disabled
/Enabled – this default setting allows the computer system to perform a full
boot with a full set of devices. In full configuration mode, all devices are detected and
initialized. The enabled option allows the computer system to do a minimal boot. In
minimal configuration mode, only the devices that are necessary to boot the system are
detected and initialized as defined in the option settings below:
Skip VGA:
Disabled/ Enabled
Skip USB:
Disabled/ Enabled
Skip PS2:
Disabled/ Enabled
The next four BIOS settings on this screen are:
•
Gate20 Active:
Upon Request, Always
•
Option ROM Messages:
Force BIOS, Keep Current
•
INT19 Trap Response:
Intermediate, Postponed
•
CSM Support:
Disabled, Enabled, Auto
These are special purpose BIOS settings and should remain in the default positions. Contact Trenton’s
technical support team if you need to use these BIOS settings.
4-1
Trenton Systems Inc.