TRENDWOO BEAT IT, Руководство пользователя, Страница: 3 / 4

TURN ON & BLUETOOTH CONNECTED
1. Switch the On/Off button to power on.
2. You will hear a beep. Wait for the LED light to flash BLUE.
These indicators mean the speaker is ready to pair.
3. Enable Bluetooth on device. “Settings” > enable “Bluetooth”
4. Scan for device and select “Tr-Beat it” from the devices list.
5. When pairing is successful, you will hear a beep and the LED light will illuminate BLUE. This is a
one-time event per device.
AUX AUDIO-IN CONNECTED
Your “BEAT IT” speaker also can be connected via 3.5mm stereo input. When connected via a
3.5mm stereo input, the speaker’s control panel functions, such as the Play/ Pause and Volume
& Track Controls, will not work. These functions can only be controlled from your audio source.
USING AS A SPEAKERPHONE
Your “BEAT IT” speaker can be used as a noise cancelling speakerphone, press the answer-end
button on the “BEAT IT” speaker when you have an incoming phone call. When you’re done,
simply press the answer-end button again to end the call. To reject a call, press and hold the
answer-end button.
CHARGEING YOUR “BEAT IT” SPEAKER
First use your “BEAT IT” speaker ,please charge it until the battery light turn off.
When your “BEAT IT” speaker battery power low than 10%,the battery light will turn red, please
charge it until the battery light turn off .
Note: please use the 5V/1A charge your “BEAT IT” speaker.
SPECIFICATIONS

Bluetooth: 4.0+EDR

Bluetooth Profile: A2DP, AVRCP

Bluetooth Transmission Distance:10m

3.5mm Aux-in

Speaker Diameter: 45mm

Power Output: 5W x 2

Frequency Response: 180Hz - 20KHz

Built-in Microphone

Size:179*80*71mm