manualshive.com logo in svg

TRENDware ProXpress TE100-S55, Руководство пользователя

Поделиться
Скачать
TRENDware ProXpress TE100-S55 Скачать руководство пользователя страница 50

 

50

Appendix E  

100Base-FX/TX Module 

The physical specification for Fast Ethernet cabling comes in 
three different flavors.  These include 100Base-TX (2-pair over 
Cat 5 UTP), 100Base-T4 (4-pair over Cat 3 UTP), and 100Base-
FX (2 fiber connections). 

The 100Base-TX specification is the most popular cabling 
scheme for Fast Ethernet networks.  Since it requires a UTP cable 
similar to 10Base-T, installation and configuration of 100Base-
TX cabling is easy and cost-effective.  

In contrast, the 100Base-FX specification requires the fiber optic 
cabling which is more expensive than the conventional UTP 
cabling.  However, it has a definite appeal to widespread LANs 
where cost of wiring is less important than the distance it delivers 
to Ethernet LANs--400 meters for half-duplex segments and 2 
kilometers for full-duplex segments.  

For flexibility, the TE100-S55 provides an 100Base-FX/TX 
module  that’s equipped with both Fiber Optic and UTP ports.  It 
permit the users to choose the necessary cabling type that fits their 
individual needs. 

The 100Base-TX port requires two-pair Category 5 UTP cable or 
two-pair Type 1 STP cable.  It services distance of up to 100 
meters and supports full or half-duplexing.  The 100Base-FX port 
requires one pair of 62.5/125 micron fiber-optic cable.  It services 
distance of up to 400 meters and supports full or half-duplex 
operation.  It is an ideal solution for backbone connections. 

Although the 100Base-FX/TX module is equipped with two 
ports (MIC and UTP connectors), please keep in mind that 
only one port may be used at a time.

     

 

 

How to Install the 100Base-FX/TX module 

Содержание ProXpress TE100-S55


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды