2
3
1. Place material to be examined
on the slide and insert into the
specimen stage. If necessary,
secure the specimen with one
of the clear stickers, which
will hold it flat and prevent it
from moving around. You can
also place your microscope
over larger specimens and
look at them directly, without
having to mount them on a
slide.
2. Press the LED On / Off button.
3. Look through eyepiece and
turn the zoom wheel to adjust
to the desired degree of
magnification.
4. Turn the focusing wheel
gradually until the image is
sharp.
Getting Started
Components
Inspired by
LED On / Off
button
Battery
pull out tab
Battery door
Battery
door screw
Specimen slide
Static cover
Cleaning
cloth
Specimen
stage
Focusing
lever
Zoom
(magnification)
Eyepiece
Insert 3 x AG13 (LR44) 1.5 button cell batteries in the
body of the microscope.
You will need a Phillips head (+) screwdriver to
remove the battery compartment cover.
Make sure they are in the correct polarity.
Replace the battery compartment cover and re-insert
the screw. Do not over tighten.
Battery Installation
Adults only
– Only adults should replace batteries.
– Do not mix battery types or old and new batteries.
– Non-rechargeable batteries are not to
be recharged.
– Batteries are to be inserted with the
correct polarity.
– Do not short-circuit the supply terminals.
– Remove exhausted batteries.
– When not in use, remove batteries to
prevent possible leakage.
– Use only recommended or equivalent
battery types.
– Do not dispose of batteries in fire:
batteries may explode or leak.
IMPORTANT INFORMATION
Safe Battery Usage
TAKE
A CLOSER
LOOK AT THE
WORLD
INTEGRAL
LED
ILLUMINATOR,
ZOOM WHEEL
AND FOCUS
LEVER
