F.A.Q for TW100-BRF114U
Q: How do I configure the TW100-BRF114U for a DSL, PPPoE connection?
A: Open your web browser and type the IP address of the TW100-BRF114U in the address bar.
The default IP address is 192.168.0.1. At the login, enter your username (blank) and password
(blank).
NOTE: If the Setup Wizard starts, click on
Cancel.
Click on
Advanced
then
WAN Port
on the left hand side.
1)
Choose
PPPoE
for the
Login Method
in the
Login
section.
2)
Enter your
Username
and
Password
provided by your ISP (Internet Service Provider).
3)
Click on the down arrow for the
Connection behavior
and select
“keepalive”
.
4)
Click
Save
.
Note: After you save the settings you may need to power cycle the modem and router.
1)
Disconnect the power cycle from the modem and router.
2)
Wait approximately 15 seconds.
3)
Reconnect the modem first and wait for it to boot up.
4)
After the modem has booted up reconnect the router.
04/03/2006
Содержание TW100-BRF114U
