TRENDnet TV-IP862IC, Руководство пользователя, Страница: 38 / 78

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP862IC
36
Configuring Camera Settings
The TV-IP862IC allows you to make configuration changes from anywhere by connecting
to the camera using a standard web browser.
To configure camera settings:
1. Login to the camera as described in the section Using the web-based
configuration interface.
2. Click System . The system status screen appears.
Admin Password Settings
In this section there are two configuration parts –
Admin and Time and Date . These
settings can be configured using the Setup Wizard but if you have already done the
wizard and want to return to these settings, this is the place to do it.
1.
Enter the Old Password (30 characters is the maximum length)
2. Enter the New Password (30 characters is the maximum length)
3. Confirm New Password – Repeat the password you have just entered.
4. Click Save.
Please Note the password can only contain:
Alphanumeric: A-Z, a-z, 0-9, and Special
Characters: !, @, #, $, %
Add User Account
1. User Name – enter a new username in this field.
2. New Password – enter a password for the user in this field.
3. Confirm New Password – Repeat the password you have just entered.
4. Click Add to continue.
User List
The User List is now populated with the name(s) of the user(s) you have added to the
above configuration. If you wish to delete a user, select the user from the drop-down list
and click
Delete .
Authentication
1. RTSP Authentication – click the checkbox if you wish to enable the
authentication of Real-time Transport Streaming Protocol
2.
HTTP Authentication – click the checkbox if you wish to enable HTTP
authentication.
3.
Snapshot URL Authentication – click the checkbox if you wish to enable
snapshot authentication of the current video stream using the hyperlink next to it.
4.
Click Save to continue.
Device Settings
1. Camera Nam e – In this field enter a name for the camera.
2. OSD – Click the OSD checkbox if you wish to have an On-screen display.
3. Label – If you have clicked the OSD previously, enter a name under the Label field
to make the name visible. Also, click the Time Stamp checkbox if you wish to add a
timestamp to the image. Click Save to continue.
4. LED Light – From the drop-down list, you have the option to select Power/Link, Off,
or Blinking. These options allow you to adjust the LED settings according to your
requirements.
5. Calibrate the Device – Click the Calibrate the Device button to do exactly what it
says. The camera will now pan and tilt to get the system into calibration mode.