TRENDnet TV-IP572P, Руководство пользователя

Страница: 16 / 39

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP572P / TV-IP572PI
14
Device Management consists of Admin Password Settings :
Admin Password Settings : Here you can change the administrator password settings.
Enter the Old Password , New Password , and Confirm New Password in their respective
fields. Click Save to continue.
Add User Account : Here you can add users who want to view images on the W/WI
Enter a User Name , Password , and Verify the New Password. Click Add to continue.
User List : Here you can select a user and click the Delete button to remove the user
from your list.
Authentication : Here you have three options to authenticate. RTSP Authentication ,
HTTP Authentication , and Snapshot . Click the checkbox to enable each authentication
process or leave them blank. Click Save to continue.
The camera allows users to access the video directly
For Internet Explorer, http://camera ip/directview/tvaview.cgi
For Non Internet Explorer, http://camera ip/directview/tvjview.cgi
When HTTP Authentication is enabled, user name and password are required to access
the direct view page.
Device Settings : Here you can change the Camera Name , click OSD to enable the Label
Name and check Time Stamp to singe times into your images. The LED light has three
options from the drop-down list: Power/Link , Off , or Flicker . The options are self-
explanatory. Click Save to continue.
The next configurable section under System is Time and Date . If you didn’t set the time
and date settings in the Setup Wizard , you can change them here.