© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP562WI
46
Selecting Motion, will tell the camera only to record when motion is detected. Tick the
Schedule option to only record motion at specific times of the week. Tick the Day and
enter the Start and End times.
After selecting the Schedule option as the Trigger by event, the following can be
configured.
Selecting Schedule, will tell the camera to record always within the scope of the
schedule configured. Tick the Day and enter the Start and End times.
After selecting the Always option as the Trigger by event, the following can be
configured.
Selecting Always, will tell the camera to record always.
After selecting the Sound option as the Trigger by event, the following can be
configured.
Selecting Sound, will tell the camera only to record when sound is detected. Tick the
Schedule option to only record video when sound is detected at specific times of the
week. Tick the Day and enter the Start and End times.
In the Video Clip Type section, we can configure the following.
Select the video profile in the Source drop-down list to use. Since profile 3 is only for
JPEG, it cannot be used here. Select the File Format that the video clip will be saved as.
Options to choose from are AVI and MP4. Enter the Pre-event recording time value and
the Maximum duration time value in the spaces provided.
In the Target section, we can configure the following.
In this section we can configure where the recorded video clip will be saved. Select FTP
or E-mail as the target. After selecting FTP as the Target, enter the FTP Server address,
Port number, User Name, Password, Path, Filename Prefix, and Interval information in
the spaces provided. Tick the Passive Mode option to enable the passive mode feature.
Click the Test button to test the FTP connection.