TRENDnet TV-IP450P, Быстрое руководство по установке

Страница: 3 / 15

2
2. Hardware Installation and Configuration
1. Do not install or mount the IP camera until after you complete the installation steps below.
Next to your computer, temporarily place the IP camera in the provided protective foam insert
with the dome facing up.
2. Connect a network cable from your computer to a LAN port on your network.
3. Insert the Utility CD-ROM into your CD-ROM drive.
4. Select language from the drop down menu.
5. Click Install Camera .
6. Write down the MAC address of your camera. Then click Next .
Note : To download the latest version of the Setup Wizard utility, please go to
http://www.trendnet.com/support and select the TV-IP450P within the Products Download
dropdown list.
7. Open the dome cover by loosening the two screws on the edge of the dome and twisting the
dome over and out. Remove the lens cap and the foam ring around the lens. Then close the
dome cover.