TRENDnet TV-IP440PI Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 60

TRENDnet TV-IP440PI Скачать руководство пользователя страница 39

© Copyright 2017 TRENDnet. All Rights Reserved.

38

TRENDnet User’s Guide

TV‐IP440PI

OSD Display

Display Name:

Check this box to display the product name that
was setup in the device settings (refer to page 25
to change the device name.)

Display Date:

Check this box to display system time.

Display Week:

Check this box to display time of the week.

Time Format:

Select 12 or 24 hours’ time format.

Data Format:

Select different date format.

Display Mode:

Select transparent/flashing format.

OSD Size:

Select different size format. (Auto, 16*16, 32*32,
48*48, 64*64)

Click

Save

to save the changes

Sub stream can be used for lower resolution needed application, for example mobile
app streaming or NVR streaming.

Third stream is used for Live view only, it has resolution limitation on Chrome, Firefox
and Safari. Max resolution can be supported under Internet Explorer.

Note: When H.264+/H.265+ is enabled, Live view on Chrome or Firefox will be
disabled due to browser limitation, you can continue to use Internet Explorer or Safari
to view the camera otherwise disable the H.264+ and H.265+ option.

Text Overlay

Display extra information on the screen over the image.

Text Overlay

Check Box:

Check this box to enable text overlay.

Text Field:

Enter the text you want to display. You can enter
your local language if you want. The text field
allows maximum 44 English letters or 20 non‐
English characters.

Click

Save

to save the changes

«
...
37
38
39
40
41
...
»

Содержание TV-IP440PI





























































Отзывы:

Нет отзывов