TRENDnet TV-IP422 Скачать руководство пользователя страница 110

Страница: 110 / 111

- 109 -

FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY

PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Governing Law

: This Limited Warranty shall be governed by

the laws of the state of California.

Some TRENDnet products include software code written by

third party developers. These codes are subject to the GNU

General Public License ("GPL") or GNU Lesser General Public

License ("LGPL").

Go to

http://www.trendnet.com/gpl

http://www.trendnet.com

Download section and look for the

desired TRENDnet product to access to the GPL Code or LGPL

Code. These codes are distributed WITHOUT WARRANTY and

are subject to the copyrights of the developers. TRENDnet

does not provide technical support for these codes. Please go

http://www.gnu.org/licenses/gpl.txt

http://www.gnu.org/licenses/lgpl.txt

for specific terms of

each license.

Содержание TV-IP422
















































































































Результаты поиска

Содержание TV-IP422

Отзывы:

TRENDnet TV-IP422, Руководство пользователя, Страница: 110 / 111

Результаты поиска

Содержание TV-IP422

Отзывы: