TRENDnet TV-IP344PI, Руководство пользователя, Страница: 14 / 39

© Copyright 2017 TRENDnet. All Rights Reserved.
12
TRENDnet User’s Guide
Limited Warranty
NETWORK
Network >> Network Setting >> IP Address Setting

DHCP : Select this option when your network uses the DHCP server. When the camera
starts up, it will be assigned an IP address from the DHCP server automatically.

Static IP : Select this option to type in IP address, subnet mask, gateway, and DNS
manually. Default IP address is 192.168.10.30 if the camera doesn't connect with
DHCP server. DNS (Domain Name System) translates domain names into IP
addresses. Enter the Primary DNS and Secondary DNS that are provided by the ISP.
Network >> Network Setting >> IPv6 Setting
IPv6 is a newer numbering system that provides a much larger address pool than IPv4,
which accounts for most of today’s Internet traffic. You can manually enter IPv6 address
, enable DHCPv6 to get IPv6 address automatically.

Manually setup the IPv6 address : You can set up IPv6 manually by enter IP Address,
Gateway, and DNS.

DHCPv6 : If you have a DHCPv6 server, enable this option to assign the IPv6 from
server. The assigned IP address will be displayed

IPv6 Address : A virtual IPv6 address generated by the IP camera. This virtual IPv6
address cannot use on WAN. To access the IP camera via IPv6 address, open a web
browser and type in http:// [IPv6 Address] in the address bar. The [ ] parentheses
mark is necessary for IPv6 address.
Network >> Network Setting >> Port Setting

Web Page Port : Setup HTTP web page connecting port which is also video
transmitting port (Default: 80)

HTTPS Port : Setup HTTPS connecting port (Default:443)