TRENDnet User’s Guide
TV-IP321PI
© Copyright 2015 TRENDnet. All Rights Reserved.
50
Enable
Tamper
Detection:
Check this box to enable tamper detection. Click
Save
to save the settings.
Draw Area:
Click
Draw Area
button to start drawing. Click and
drag on the area you want to set up the tamper
detection. You can setup only one area for tamper
detection. Click
Stop Drawing
to stop drawing
motion detection areas. The gray block represents
the detection area.
Sensitivity:
Move the slider to adjust detection sensitivity.
Clear All:
Click this button to clear all the set up areas.
Arming Schedule
Edit:
Click
Edit
to edit the recording schedule. The Edit
Schedule window will pop up.
1.
Select day of the week you want to edit.
2.
Select
All Day
or
Customized
schedule of
the day.
3.
Set the time period and the event you want
to trigger the video recording
continuous
(always recording) or
motion detection
.
4.
Click
Select All
or
the weekday you want to
have the same schedule on different day.
5.
Click another day of the week by clicking on
its tab to set the next schedule. Click
OK
when you have finished your settings.
Notification
Send Email:
Check this box to send an e-mail notification
when motion is detected.
Click
Save
to save the changes