4
1.
Open Internet Browser Window and enter
<http://192.168.0.30>
(camera's
default IP address)
2.
Click on
System Administration
to access the configuration page.
3.
Enter an IP address, Subnet mask, and Default gateway that corresponds
with your existing network for the camera. Then click on
Save
button to keep
the changes.
English
3. Configure the Internet Camera
Note:
The PC's IP (Example 192.168.0.50) address must correspond
with the Internet Camera's IP address (Default IP: 192.168.0.30) in the
same segment for the two devices to communicate.
Note:
If you need to access the configuration remotely, it is
recommended to enter a static IP address and the Internet DNS IP
address.