TRENDnet TV-IP121W, Руководство пользователя, Страница: 22 / 98

- 21 -
3.3 Configuring the IP Address of the PC
If you failed to access the camera, please check the IP address of
your computer. When you connect the camera to your computer
directly to proceed with configuration of the camera, you need to set
up the IP Addresses to be in the same segment for the two devices
to communicate.
1. On your computer, click Start > Control Panel to open the
Control Panel window.
2. Double-click Network Connection to open the Network
Connection window.
3. Right-click Local Area Connection and then click Properties
from the shortcut menu.
4. When the Local Area Connection Properties window appears,
select the
General tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to
bring up the Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of the
camera, select the
Use the following IP address option. Then,
enter an IP address into the empty field. The suggested IP
address is
192.168.10.x ( x is 0~254 except 30), and the
suggested Subnet mask is 255.255.255.0 .
7. When you are finished, click OK .