9.
Copy down the IP Address. Then
click the reboot button to save
settings.
10.
Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in (TV-IP100W-N).
English
6
8.
If WEP is enabled on your wireless
network, select the
Encryption
Mode
(e.g. 64-bit, 128-bit), the
Key
Format
(e.g. Hex, ASCII) and the
Default Key
(e.g. Key_1, Key_2,
Key_3, Key_4). Then enter the
encryption key in the Key1, Key2,
Key3 or Key 4 field. Then click the
right arrow.
If WPA is enabled on your wireless
network, enter the encryption key
in the
Pre-Shared Key
field and
then click the right arrow button to
continue.
Note: If you do not know your
encryption key, contact your
network administrator for more
information
Note:
The TV-IP100W-N will not work wirelessly until you disconnect the
Ethernet cable from the back of the camera.