background image

 

 

Limited Warranty

 

 

TRENDware warrants its products against defects in material and workmanship, under 
normal use and service, for the following lengths of time from the date of purchase.     
 

 

TS-U100 – 2 Years Warranty 

 

If a product does not operate as warranted above during the applicable warranty period, 
TRENDware shall, at its option and expense, repair the defective product or part, deliver 
to customer an equivalent product or part to replace the defective item, or refund to 
customer the purchase price paid for the defective product.    All products that are 
replaced will become the property of TRENDware.    Replacement products may be new 
or reconditioned. 
 
TRENDware shall not be responsible for any software, firmware, information, or memory 
data of customer contained in, stored on, or integrated with any products returned to 
TRENDware pursuant to any warranty. 
 
There are no user serviceable parts inside the product.    Do not remove or attempt to 
service the product by any unauthorized service center.    This warranty is voided if (i) 
the product has been modified or repaired by any unauthorized service center, (ii) the 
product was subject to accident, abuse, or improper use (iii) the product was subject to 
conditions more severe than those specified in the manual.

 

 

Warranty service may be obtained by contacting TRENDware office within the applicable 
warranty period for a Return Material Authorization (RMA) number, accompanied by a 
copy of the dated proof of the purchase.    Products returned to TRENDware must be 
pre-authorized by TRENDware with RMA number marked on the outside of the package, 
and sent prepaid, insured and packaged appropriately for safe shipment.     
 

WARRANTIES EXCLUSIVE

: IF THE TRENDWARE PRODUCT DOES NOT OPERATE 

AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT 
TRENDWARE’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING 
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF 
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDWARE 
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT 
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION 
MAINTENANCE OR USE OF TRENDWARE’S PRODUCTS. 
 
TRENDWARE SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING 
AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT 
DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S 
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED 
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE 

Содержание TS-U100 - NAS Server - USB
















































Отзывы: