TRENDnet TPE-TG44ES, Руководство пользователя

Страница: 9 / 30

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-TG44ES
7

Jumbo Frame: Check the option and click Apply to enable jumbo frames. The
switch can support jumbo frames up to 9KB in size.

Power Saving (EEE): Check the option and click Apply to enable IEEE 802.3az
power saving.
The IEEE 802.3 EEE standard defines mechanisms and protocols intended to
reduce the energy consumption of network links during periods of low utilization,
by transitioning interfaces into a low-power state without interrupting the
network connection. The transmitted and received sides should be IEEE802.3az
EEE compliance.
Configure IP address settings
Set your switch IP address settings
Management
This section allows you to change your switch IP address settings. Typically, the IP
address settings should be changed to match your existing network subnet in order to
access the switch management page on your network.
Default Switch IP Address: 192.168.10.200
Default Switch IP Subnet Mask: 255.255.255.0
1. Log into your switch management page (see “ Access your switch management page ”
on page 6).
2. Click on Management.
3. Review the settings. When you have completed making changes, click Apply to save
the settings.

DHCP: Click the drop-down list and select Disable to manually specify your IP
address settings or DHCP to allow your switch to obtain IP address settings
automatically from a DHCP server on your network

IP Address: Enter the new switch IP address. (e.g. 192.168.200.200)

Subnet Mask: Enter the new switch subnet mask. (e.g. 255.255.255.0)

Gateway: Enter the default gateway IP address. (e.g. 192.168.200.1 or typically
your router/gateway to the Internet).