7
Installing in a Chassis
The Converter can be fit into any of the expansion slots
on a special designed chassis (TFC-1600).
?
First, install the converter onto a carrier supplied with
the chassis:
Step 1- Locate a vacant slot on the chassis, unscrew
the thumbscrew, and remove the dust cover
(save the cover).
Step 2- Remove the screw on the converter as shown
above pull put the converter board.
Step 3- Insert the converter board in the empty slot,
make sure it is fully seated to the slot, and
tighten the thumbscrew to secure it on the
chassis.
Unscrew and pull out the
media converter board
