TRENDnet TEW-826DAP Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 72

TRENDnet TEW-826DAP Скачать руководство пользователя страница 44

© Copyright 2018 TRENDnet. All Rights Reserved.

TRENDnet User’s Guide

TEW-826DAP

41

4.

Click on the wireless network you would like to repeat. The information will
automatically fill on the previous screen. You will then need to select and enter
the wireless security.

5.

Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.

Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.

Repeater: Advanced wireless settings

Wireless (2.4GHz, 5GHz1, or 5GHz2) > Advanced Wireless

1.

Log into your management page (see “

Access the management page

” on page

8).

2.

Click on the wireless band you would like to configure and click Wireless
Advanced Settings.

3.

Review the settings and click Save to save settings.



Data Rate: Select the operating wireless data rate.



Transmit Power: The wireless transmit power can be modified to lower
the antenna strength setting from 18 dBm to 11 dBm, if necessary.
Lowering the wireless transmit power may help to better stabilize the
wireless connectivity and reduce the effects of wireless interference in
areas where there are several 2.4GHz wireless devices. (Default: 18 dBm)



RTS/CTS Threshold: The Request To Send (RTS) function is part of the
networking protocol. A wireless device that needs to send data will send a
RTS before sending the data in question. The destination wireless device
will send a response called Clear to Send (CTS). The RTS Threshold defines
the smallest data packet size allowed to initiate the RTS/CTS function.



Default Value: 2347 (range: 256-2346)



Beacon Period: A beacon is a management frame used in wireless
networks that transmitted periodically to announce the presence and
provide information about the access point’s wireless network. The
interval is the amount time between each beacon transmission.

«
...
42
43
44
45
46
...
»

Содержание TEW-826DAP









































































Отзывы:

Нет отзывов