6
WiFi-Setting
Use this section to manually configure the wireless settings for your Repeater.
Wireless Mode:
This will automatically be
Repeater Mode
.
Site Survey:
Scans and displays available Wi-Fi networks.
Wi-Fi Network Name:
When you are browsing for available wireless networks, this is the name that will appear in
the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from the default network name.
Channel Width:
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
WiFi
Security Mode:
Select WEP or WPA Personal.
