TRENDnet TEW-691GR, Руководство пользователя, Страница: 21 / 56

21
Note: One wireless mode can be selected can select at any one time. This means that you can
only select one of the operating frequency at a time.
Wireless Mode options
2.4GHz 802.11b/g mixed mode
- This wireless mode works in the 2.4GHz frequency range
and will allow both wireless b and wireless g client to connect and access the TEW-691GR at
11Mbps for wireless b, at 54Mbps for wireless g and share access at the same time. Although
the wireless b/g operates in the 2.4GHz frequency, it will allow the use of other 2.4GHz client
devices (Wireless n/g @ 54Mbps) to connect and access at the same time.
2.4GHz 802.11 n only
– This wireless mode works in the 2.4GHz frequency range and will
only allow the use of wireless n client devices to connect and access the TEW-691GR up to
450Mbps*. Although the wireless n operates in the 2.4GHz frequency, this mode will only
permit wireless n client devices to work and will exclude any other wireless mode and devices
that are not wireless n only.
2.4 GHz 802.11b/g/n mixed mode
- This wireless mode works in the 2.4GHz frequency range
and will only allow the use of wireless g client devices to connect and access the TEW-691GR
at 11Mbps for wireless b, 54Mbps for wireless g and up to 450Mbps* for wireless n and share
access at the same time. Although the wireless b/g/n operates in the same 2.4GHz frequency,
it will allow the use of other 2.4GHz client devices (Wireless b/g/n) to connect and access at
the same time.
*
Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput
and coverage will vary depending on interference, network traffic, building materials and other conditions.
Wireless Network Name (SSID)
When you are browsing for available wireless networks, this is the name that will appear in the
list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the
SSID. For security purposes, it is highly recommended to change from the pre-configured
network name. Add up to three additional SSIDs to create virtual wireless networks from one
wireless Router Access Point device.
Add Additional Wireless Network Name (SSID)
To add additional wireless Network Names simply add the name to the Multiple SSID field and
click on apply at the bottom of the page. When finished, go to the Security section in this Users
Guide for wireless security configuration.
Frequency (Channel)
A wireless network uses specific channels in the wireless spectrum to handle communication
between clients. Some channels in your area may have interference from other electronic
devices. Choose the clearest channel to help optimize the performance and coverage of your
wireless network.
Wireless Distribution System (WDS)
When WDS is enabled, this access point functions as a wireless repeater and is able to
wirelessly communicate with other APs via WDS links. A WDS link is bidirectional; so this AP
must know the MAC Address (creates the WDS link) of the other AP, and the other AP must
have a WDS link back to this AP. Make sure the APs are configured with same channel.
(Note that WDS security is incompatible with mixed mode, like WPA2PSK mixed,
WEP AUTO and 802.1x, both feature cannot be used at the same time).
Configuring WDS with TEW-691GR
Enable the option for WDS and input the MAC Address of the wireless device that also
supports WDS in to the blank fields. You can add up to four additional devices in the spaces
provided. Click on apply at the bottom of the page, to apply your setting changes.
Enable the security seeing in security page, each WDS APs need to use same security setting.
(Note: WDS supports wireless g/n modes. The use multiple Access Point will reduces the
overall network throughput to ½ the TEW-691GR.
HT Physical Mode
In HT (High Throughput) Physical mode setting allow for control of the 802.11n wireless
environment.