5
10
.
Select the desired Authentication mode,
select the desired Encryption type, enter
characters for your Preshare key and
then click
Next
. For WPA-PSK or
WPA2-PSK, the Preshare key must be
between 8 and 63 ASCII or 64 HEX
characters. Make sure to copy down the
Preshare key. You will need the Preshare
key when you configure your wireless
adapter(s).
11.
Click
Apply Settings
.
12.
Please wait while the TEW-659BRV
reboots and saves the changes.
Note:
1. To protect your network from any unauthorized access it is recommended to enable wireless
encryption.
2. The example below is for WPA-PSK/WPA2-PSK (AES) security. If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless
adapters do not support WPA or WPA2, then select WEP.
3. WEP encryption only supports 802.11b/g speed of up to 54Mbps.
4. Once encryption is enabled on the router, each wireless computer and device must be
configured with the same encryption key.
13.
Click
Finish
.
