TRENDnet TEW-651BR Скачать руководство пользователя

Страница: 57 / 80

E-mail Logs:

Email the logs to specified email receiver.

When log is full

- The time is not fixed. The log will be sent when the log is full,

which will depend on the volume of traffic.

Every day, Every Monday ...

- The log is sent on the interval specified.



If "Every day" is selected, the log is sent at the time specified.



If the day is specified, the log is sent once per week, on the specified
day.



Select the time of day you wish the E-mail to be sent.



If the log is full before the time specified to send it, it will be sent
regardless.

Syslog Server:

Type the IP address of the Syslog Server if user wants the WLAN

Router to listen and receive incoming Syslog messages.

Log Type:

Enables users to select what items will be included in the log:

System Activity:

Displays information related to WLAN Router operation.

Debug Information:

Displays information related to errors and system

malfunctions.

Attacks:

Displays information about any malicious activity on the network.

Dropped Packets:

Displays information about packets that have not been

transferred successfully.

Notice:

Displays important notices by the system administrator.

Statistic

This screen displays a table that shows the rate of packet transmission via the
WLAN Router’s LAN, Wireless and WAN ports (in bytes per second).

Содержание TEW-651BR

















































































Результаты поиска

Содержание TEW-651BR

Отзывы:

Похожие инструкции для TEW-651BR

Бренды по названию

Популярные бренды

TRENDnet TEW-651BR, Руководство пользователя

Результаты поиска

Содержание TEW-651BR

Отзывы:

Похожие инструкции для TEW-651BR

Бренды по названию

Популярные бренды