3
2. Install Hardware
1.
Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet
port to the WAN port on the AP/Router.
2.
Connect a different RJ-45 network cable from one of the AP/Router's LAN
ports to your computer's network port.
3.
Turn on your Cable/DSL modem.
4.
Connect the included Power Adapter from your AP/Router to a power outlet;
your AP/Router should turn on.
5.
Turn on your computer
4
2
1
Verify Hardware Installation
Verify that the following front panel lights are on: Power, Status, WAN, WLAN,
and one LAN port LED for each wired computer connected to the AP/Router.
English
STATUS
POWER
WAN
WLAN
TEW-452BRP
LAN