Click “ Save and Restart, ”
to finish the Setup Wizard.
After the Router has restarted, the installation is complete.
Step 3
To check the connection, open the web browser and go to your favorite website.
If you are unable to browse, please refer to the troubleshooting section in the user’s manual.
TEW-211BRP AP Default Settings
By default settings, the TEW-211BRP AP is regarded as an “AP Router”. The default settings are
shown following.
Note:
In WEB mode setup system, only one user allows to access setup program at one time i.e.
setup system will decline when other users to connect setup system.
User Name
admin
Password
AP Router Name
Wireless AP
SOHO Wireless LAN
AP Router IP Address
192.168.2.1
AP Router Subnet Mask
255.255.255.0
10/100 Ethernet LAN IP
192.168.2.1
LAN MAC Address
10 Mbps Ethernet WAN IP
Obtain from ISP via DHCP
Can be manually configure
WAN MAC Address
WAN DHCP Client
Enabled
After 20 sec. Go to blank
RF ESSID
Wireless
RF Channel
6
RF Roaming
Disabled
Encryption Disabled
DHCP Server
Enabled
NAT Routing
Enabled
7