TRENDnet TEV-639GR Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 41

background image

12

router's MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may
be unable to establish some connections. In either case, network performance can suffer. t modes.

MAC Address Clone:

Each networking device has it's own unique MAC address defined by the

hardware manufacturer. Some ISP's may check your computer's MAC address. Some ISP's record
the MAC address of the network adapter in the computer or router used to initially connect to their
service. The ISP will then only grant Internet access to requests from a computer or router with this
particular MAC address. This router has a different MAC address than the computer or router that
initially connected to the ISP. If you need to change the MAC address of the rounter's WAN-side
Ethernet interface, either type in an alternate MAC address (for example, the MAC address of the
router initially connected to the ISP) or copy the MAC address of a PC. To copy the MAC address of
the computer that initially connected to the ISP, connect to the router using that computer and click the

Clone Your PC's MAC Address

button. The WAN interface will then use the MAC address of the

network adapter in your computer.

LAN SETTING

IP Address:

The IP address of the this device on the local area network. Assign any unused IP

address in the range of IP addresses available for the LAN.

Subnet Mask:

The subnet mask of the local area network.

DHCP Server Settings:

DHCP stands for Dynamic Host Configuration Protocol. The DHCP section is

where you configure the built-in DHCP Server to assign IP addresses to the computers and other
devices on your local area network (LAN).

Enable DHCP Server:

Once your router is properly configured and this option is enabled, the DHCP

Server will manage the IP addresses and other network configuration information for computers and
other devices connected to your Local Area Network. There is no need for you to do this yourself.
The computers (and other devices) connected to your LAN also need to have their TCP/IP
configuration set to "DHCP" or "Obtain an IP address automatically". When you set

Enable DHCP

Server

, the following options are displayed.

«
...
10
11
12
13
14
...
»

Содержание TEV-639GR










































Отзывы:

Нет отзывов

Похожие инструкции для TEV-639GR

Бренд: H3C Страницы: 1057

MediaStream ConnectPlus 1000

Бренд: Avid Technology Страницы: 74

Бренд: NETGEAR Страницы: 2

Avenue Express Control Panel

Бренд: Ensemble Designs Страницы: 19

MasterBus Tanklevel Interface

Бренд: Mastervolt Страницы: 8

Speed Touch 591s

Бренд: Alcatel Страницы: 184

Бренд: ICP DAS USA Страницы: 62

ELITENAS EN104L+(B)

Бренд: Sans Digital Страницы: 9

Бренд: Quantum Страницы: 7

Бренд: Patton Страницы: 62

Бренд: ANEP Страницы: 48

Бренд: RR-Concepts Страницы: 12

Бренд: Linksys Страницы: 80

Бренд: Eaton Страницы: 32

BIANCA/BRICK XS

Бренд: BinTec Страницы: 2

Бренд: Billion Страницы: 2

Бренд: Cambium Networks Страницы: 292

Бренд: MTL Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды