TRENDnet TEG-S811Fi, Руководство пользователя, Страница: 41 / 109

[OID]
Port Mirroring Commands Set
Trendnet Commands Level Description Example
monitor rx G Set RX destination port
of monitor function
switch(config)# monitor rx
monitor tx G Set TX destination port
of monitor function
switch(config)# monitor tx
show monitor P
Show port monitor
information
switch# show monitor
monitor
[RX|TX|Both]
I Configure source port
of monitor function
switch(config)# interface
fastEthernet 2
switch(config-if)# monitor RX
show monitor I Show port monitor
information
switch(config)# interface
fastEthernet 2
switch(config-if)# show monitor
no monitor I Disable source port of
monitor function
switch(config)# interface
fastEthernet 2
switch(config-if)# no monitor
802.1x Commands Set
Trendnet Commands Level Description Example
8021x enable G Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiousip
[IP address]
G Use the 802.1x system
radious IP global
configuration
command to change
the radious server IP.
switch(config)# 8021x system
radiousip 192.168.1.1
34