Thank you for purchasing the TRENDnet TEG-S2600i Stackable SNMP
Switch.
This guide will help you setup your Stackable SNMP Switch. Following the
installation instructions should be quick and easy. If you run into problems,
please refer to the Troubleshooting section. If you need further technical
support, please visit www.TRENDNET.com or call technical support by phone.
Verify Package Contents
Please make sure you have everything in the box:
1
1. Prepare for Installation
English QIG
English
Minimum System Requirements
Before setting up the TEG-S2600i, you should have the following:
1.
Workstations with network cards
2.
TCP/IP protocol installed in all workstations
3.
A web browser such as Internet Explorer or Netscape Navigator
4.
RJ-45 Network Patch Cable to connect your workstations to the TEG-S2600i
TEG-S2600i
One AC power cord
One RS-232 cable
Quick Installation Guide
Four rubber cushions
with adhesive backing
User's Guide CD-ROM
Mounting Kit: 2 mounting
brackets and screws
TRENDnet
TRENDware, USA
What's Next in Networking
TEG-S2600i
Version 04.06.2005
Stackable SNMP Switch
Quick Installation Guide
Switch SNMP empilable
Guide d'installation rapide
Stapelbarer SNMP-Switch
Kurzanleitung zur Installation
Guía de instalación rápida
del conmutador SNMP apilable