TRENDnet TEG-S18TX, Руководство пользователя, Страница: 16 / 21

12
Rear Panel
The rear panel of the Switch consists of an AC power connector and
an on/off switch. The following figure shows the rear panel of the
Switch.
Figure 3-2. Rear panel view of the 9-port 10/100/1000Mbps NWay
Gigabit Ethernet Switch
? ?
AC Power Connector This is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a
power outlet. Supported input voltages range from 100 ~ 240
VAC at 50 ~ 60 Hz.
? ?
On/Off Switch This is the power on/off switch. After the
power cord is connected, push “ - “ to power on the Switch and
push “ o “ to power it off.
LED Indicators
The LED indicators of the Switch including Power, ALERT, HTTP,
ICQ, SMTP, SPEED, LINK/ACT and FDX/COL. The following shows