User’s Manual
10
Connecting to Power
Connect the supplied AC power cord to the receptacle on
the back of the switch, and then plug the cord into a
standard AC outlet with a voltage range from 100 to 240
VAC.
Turn on the switch by flipping the ON/OFF switch on the
rear of the unit to the
I
(ON) position. The
O
position is
OFF.
Connecting to Your Network
Consult Table 1 for specific cabling requirements.
Prepare cable with connections corresponding to the port.
Install the same type of connectors at both ends for
proper performance. With the power switch in the OFF
position, connect the cables. No further installation is
necessary.
Table 1: Cable Specifications
Speed Connector
Port
Speed
Half/Full
Duplex
Cable Range
100BASE-
TX
RJ-45 100/200
Mbps
Category 5
UTP
100 meters
10BASE-T RJ-45
10/20
Mbps
Category 3,
4, or 5 UTP
100 meters
100BASE-
FX
SC 200
Mbps
62.5/125
micron fiber-
optic cable
2
kilometers