10/100 Fast Ethernet Switch User’s Guide
Connecting The Switch
19
Figure 9, TE100-S88 Switch connected to a PC or Workstation
The LED indicators show the connection status between the
Switch and the PCs. If LED indicators are not lit after making
proper connections, check the PC’s LAN card, the cable, Switch
conditions and connections.
The following are the possible LED indications for a PC to Switch
connection:
1.
The 100 M LED indicator comes on for a 100 Mbps and stays
off for 10 Mbps.
2.
The Link/Act LED indicator illuminates upon hookup.
3.
The FDX/Col LED indicator status depends on the LAN
cards status.
Hub to Switch
A hub (10 or 100Base-T) can be connected to the Switch via a two-
pair Category 3, 4, 5(required for 100Base-T) UTP/STP straight-