background image

 

1

 

I

NTRODUCTION

 

This chapter describes the features of the Switch and some 
background information about Ethernet/Fast Ethernet switching 
technology. 

Fast Ethernet Technology 

The growing importance of LANs and the increasing complexity of 
desktop computing applications are fueling the need for high 
performance networks. A number of high-speed LAN technologies 
have been proposed to provide greater bandwidth and improve 
client/server response times.  Among them,  100BASE-TX (Fast 
Ethernet) provides a non-disruptive, smooth evolution from the 
current 10BASE-T technology.  The non-disruptive and smooth 
evolution nature, and the dominating potential market base, virtually 
guarantee cost effective and high performance Fast Ethernet solutions 
in the years to come. 

100Mbps Fast Ethernet is a new standard specified by the IEEE 802.3 
LAN committee.  It is an extension of the 10Mbps Ethernet standard 
with the ability to transmit and receive data at 100Mbps, while 
maintaining the CSMA/CD Ethernet protocol. Since the  Switch is 
compatible with  all 10Mbps Ethernet environments, it provides a 
straightforward upgrade and takes advantage of the existing 
investment in hardware, software, and personnel training. 

 

 

 

Содержание TE100-S16plus

































Отзывы: