INTRODUCTION
Congratulations
on your purchase of a PCI Fast
Ethernet adapter. This adapter was designed and
manufactured to give you years of trouble free and
reliable service.
PCI Ethernet Card
The PCI Ethernet adapter is a high performance
adapter compatible with version 2.0 of the PCI local
bus specification and support Plug and Play (PnP)
function, making it fully auto-configuration.
The adapter supports full-duplex mode. Full duplex
mode can be used to obtain throughput of up to
20/200Mbps when connecting through an Ethernet
switching hub. It also uses the Bus Mastering
features of the PCI bus to give high performance
with a low CPU load. Bus mastering adapter and
other peripherals allow greatly reduced CPU
utilization ratios, resulting in lower latency and
better overall performance.
The Ethernet adapter includes a complete set of
drivers for popular network operating systems. The
optional BOOT ROM device allows the diskless
workstation to be connected to the network.
1
Product Features
Meets PCI Local Bus specification, Rev. 2.0
PCI 32-bit Bus Master architecture
IEEE 802.3u Auto-Negotiation for automatic
selection of data transmission speed.
Easy migration; single RJ-45 port for both
10Base-T and 100Base-TX
Support Full Duplex operation on both 10Base-
T and 100Base-TX
Support 100ohm STP/UTP cables using
Category 3, 4 or 5 for 10Mbps mode and
category 5 for 100Mbps mode
LED indicators for installation verification and
diagnostic purpose.
State
Description
ACT/ Blinking whenever a packet is transmitted
Activity or received
Link
-
Lit when there is a good connection
between the workstation and the port that
is connected to 10Base-T.
Link-
Lit when there is a good connection
100
between the workstation and the port that
is connected to 100Base-TX.
2
Содержание TE100-PCIE
Страница 5: ......
