TRENDnet TDM-C400, Руководство пользователя

Страница: 112 / 205

TDM-E400 / TDM-C400 ADSL2+ Ethernet Modem Router User’s Manual
112
Configuring the Ethernet Modem Router ’s Interfaces
with RIP
The following instructions describe how to enable RIP on the
Ethernet Modem Router .
Note
In order for the Ethernet Modem Router to communicate with
other devices using RIP, you must also enable the other devices
to use the protocol. See the product documentation for those
devices.
1. Log into the Web Configuration, click the Services tab, and
then click
RIP
in the task bar.
The RIP Configuration page displays:
Figure 43. RIP Configuration Page
The page contains radio buttons for enabling or disabling the
RIP feature and a table listing interfaces on which the protocol
is currently running. The first time you open this page, the table
may be empty.
2. If necessary, change the Age and Update Time values.
These are global settings for all interfaces that use RIP.
f
Age is the amount of time in seconds that the device’s RIP
table will retain each route that it learns from adjacent
computers.
f
Update Time specifies how frequently the Ethernet Modem
Router will send out its routing table to its neighbors.
3. In the IFName column, select the name of the interface on
which you want to enable RIP.
For communication with RIP-enabled devices on your LAN,
select the LAN interface (usually eth-0).
For communication with your ISP or a remote LAN, select the
PPP, EoA, or other WAN interface used for that connection.
(See page 92 for a description of various interfaces and their
names.)