TRENDnet 15-AH28B, Быстрое руководство по установке, Страница: 4 / 16

English
3
5.
Remove the circuit board from the
camera enclosure by unscrewing
the two screws. Save these
screws. You will need to use these
screws later.
4.
Flip over the camera housing and
remove the rubber stoppers and
washers.
7.
Cut the rubber insulation using a
knife or box cutter.
6.
Take a power cord and cut it using
a wire cutter. Cut it near the female
end of the power cord. Note: The
power cord is not included with
15AH-28B.