TRENDnet 12dBi Скачать руководство пользователя страница 54

Страница: 54 / 147

TRENDnet User’s Guide

TEW-676APBO



LAN Information :

Display total received and transmitted statistics on the LAN

interface.



MAC Address :

The MAC address of the LAN port.



IP Address :

The IP address of the LAN port.



IP Netmask :

The IP netmask of the LAN port.



Receive bytes :

The total received packets in bytes on the LAN port.



Receive packets :

The total received packets of the LAN port.



Transmit bytes :

The total transmitted packets in bytes of the LAN port.



Transmit packets :

The total transmitted packets of the LAN port.



DHCP Server Status :

Users could retrieve DHCP server and DHCP clients’ IP/MAC

address via this field.



IP Address :

IP addresses to LAN devices by DHCP server.



MAC Address :

MAC addresses of LAN devices.



Expired In :

Shows how long the leased IP address will expire.

Station Statistics

Link information, Transmit and Receive Statistics for the connection with AP, Below

depicts an example for Station Statistics.

Содержание 12dBi



















































































































































Результаты поиска

Содержание 12dBi

Отзывы:

TRENDnet 12dBi, Руководство пользователя, Страница: 54 / 147

Результаты поиска

Содержание 12dBi

Отзывы: