Produkt view
Package Contents
(1) LED Decoration Projector TG-122
(2) Ground spike (3) Allen wrench
(4) User Manual
Outdoor use
How to attach the ground spike
Indoor use
Put the device on the table or on any another
suitable mounting surface. When installing,
please make sure that the unit cannot swing
freely.
Operation
This product serves as a light decoration and is intended for use in
outdoor and indoor area (protection class IP44: protection against
ingress of dust & against splashing waters). This product is not
suitable for commercial use.
For outdoor use
follow these steps
Use the hex screw, locking washer, and washer to attach the
ground spike to the pivot mount (see above).
Place the Projector with the ground spike at the desired location
into the ground.
Position the projection by changing the angle of projector.
Extension cables that may be used must be suitable for the outdoor
area. Make sure that the plug connection is never placed in or under
water, eg in puddles or in places where rain water could accumulate.
