TREND Thermistor TBTI, Руководство по установке

Страница: 3 / 8

TB/TI Thermistor Insertion Temperature Sensor Installation Instructions TG200727 Issue 5, 07-Mar-2016. 3
Installation Instructions TB/TI
3
Install Immersion Sensor
2 InSTallaTIon
(continued)
InSTall SenSoR InTo PoCKeT
(if using compatible pocket)
Drill hole for boss Fix threaded boss Screw pocket into boss
G½” BSPP
threaded boss
Apply sealent to boss thread
InSTall PoCKeT
(if installing new pocket)
Push adaptor onto probe Adjust probe length
if pocket has grub screw,
discard spring and clip
clip
spring
brass brush
tighten
use 2 mm hexagonal
socket key
pocket
length
clip engages in groove
probe is forced against
end of pocket
tighten screw
over bush
InSTall SenSoR InTo PoCKeT
(If using Universal Fitting Kit)
if pocket has clip retaining groove,
push clip over pocket
IMPORTANT: If used for chilled water ensure pocket is sealed
around probe or fi ll pocket with thermally conducting oil to
avoid the build up of condensation in bottom of pocket.
use M24 spanner
use 2 mm hexagonal socket key
spring compression fi tting
tighten screws
Either: (if using new pocket) Or: (if using old pocket with grub screws)
probe is forced against
end of pocket
IMPORTANT: If used for chilled water ensure pocket is sealed around probe or fi ll pocket
with thermally conducting oil to avoid the build up of condensation in bottom of pocket.