4
TB/TS/KO, /OS, /KOS, /KOF, /KOSF Sensors Installation Instructions TG200606 Issue 2, 08/03/2011
TB/TS/KO, /OS, /KOS, /KOF, /KOSF
Installation Instructions
Please send any comments about this or any other Trend technical publication to [email protected]
© 2011 Honeywell Technologies Sàrl, ECC Division. All rights reserved. Manufactured for and on behalf of the Environmental and Combustion Controls Division
of Honeywell Technologies Sàrl, Ecublens, Z.A. La Pièce, 16, 1180 Rolle, Switzerland by its Authorized Representative, Trend Control Systems Limited.
Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof without obligation
to notify any person of such revisions or changes.
Trend control Systems limited
Albery House, Springfield Road, Horsham, West Sussex, RH12 2PQ, UK. Tel:+44 (0)1403 211888 Fax:+44 (0)1403 241608 www.trendcontrols.com
Trend control System uSa
6670 185
th
Avenue NE, Redmond, Washington 98052, USA. Tel:(425) 869-3900 Fax:(425) 869-8445 www.trendcontrols.com
5 DISpOSal
WEEE Directive :
At the end of their useful life the
packaging and product should
be disposed of by a suitable
recycling centre.
Do not dispose of with normal
household waste. Do not burn.
Units
°C
°F
Y
Input type 1 (thermistor volts)
E
Exponent
3
u
Upper
50
122
l
Lower
-5
23
p
Points
6
x
Ix
Ox (°c)
Ox
(°F)
1
2.641
50
122
2
3.47
40
104
3
4.46
30
86
4
6.663
10
50
5
7.668
0
32
6
8.102
-5
23
Y
Input type
3
(thermistorKohms)
E
Exponent
1
u
Upper
3.2
l
Lower
-3.2
p
Points
4
x
Ix
Ox
1
.95
-3.1
2
1.05
-3
3
8.95
+3
4
13.05
+3.
Y
Input type
0 (volts)
E
Exponent
2
u
Upper
10
l
Lower
0
p
Points
2
x
Ix
Ox
1
0
0
2
10
10
Set up IQ Sensor types
10
Knob
(trim -3 to +3)
Thermistor
(0 to +40 °C)
Fan control
(0 to 9.7)
It is recommended to use SET (software tool) for the setting of sensor type modules. For all IQ2
series controllers with firmware version 2.1 or greater, or IQ3 series controllers, the following SET
Unique Sensor References should be used:
Knob:
Knob TB 3deg trim
(guaranteed ±3 trim)
alternatively:
Knob T 3deg trim
(±3 ±20% linear)
Thermistor:
Thermistor TBTS
(°C)
Thermistor TBTS F
(°F)
Fan control:
Fan control V
Alternatively, set scaling mode to 5 (characters) and enter scaling manually, as defined in the
tables below.
Note that for IQ3 the scaling mode and exponent (E) do not need to be set up.
For all other IQ controllers see Sensor Scaling Reference Card TB100521A
Test system
11
/K
/O
/F
/OS
∆
T
∆
SP
∆
yellow
green
InSTallaTIOn
(continued)
